Introduction Of The Work Of Cement Tile Machines

- Oct 23, 2017 -

The first is the cement brick embryo body, the purpose of brick embryo molding is to loose the mixture into the required specifications of the brick, the quality of brick to a large extent taken from the quality of brick, cement brick production determines the Factory production, therefore, brick molding is a cement brick production in a key process.Cement Tile Machines

The first is the material into the hopper, the center of the feed hole into the high-speed rotation of the rejection wheel, in the wheel was quickly accelerated, the acceleration up to several times the gravity acceleration, and then high-speed from the wheel, After the free fall of another part of the material to impact, and then together to the impact of the material lining or counterattack block, was rebounded obliquely upward impact to the top of the vortex chamber, but also to change its movement direction, deflecting downward movement, and from the impeller The material coming out of the impact of the formation of a continuous material curtain. In this way, a piece of material in the vortex crushing chamber by two to several times the impact of impact, friction and grinding crushing effect. The broken material is discharged from the lower discharge port.Cement Tile Machines

The purpose of the brick embryo molding is to process the loose mix into the desired size of the brick embryo. The quality of the brick is largely determined by the quality of the brick embryo. The production of the cement press determines the factory yield. Is a cement brick production in a key process. Non-aggregate cement brick, when the use of single-sided impact when the pressure, the ultimate molding pressure is only six to eight Pa, and the use of two-sided section when the pressure, the ultimate molding pressure of ten to twelve Pa, with the limit Increased molding pressure, improved brick density, increased bulk density, improved product quality accordingly.Cement Tile Machines

Cement brick is the production cost is not very high, coupled with the popularity of new building materials and applications, so the cement brick machine has been fully popularized and promoted, so there are many small cement brick factory began to develop The These cement brick factories are also from the production of clay brick brick brick transformation, the same, solid clay brick from the building wall material out of the stage of history Cement Tile Machines